Construction tower tour: what is good and how to choose the right one

Working at heights is always dangerous. All auxiliary devices and structures are subject to increased requirements for quality, strength and reliability. The most popular equipment that is used for repair, facing, restoration work is a tower tour. We will talk about it in detail and further.

Design advantages
These towers are very similar to scaffolding, but are smaller. They are many times more mobile, which gives them special advantages:

easy to move to the desired location;
much easier to transport;
quickly mounted (even alone);
do not require the use of additional tools and fasteners.
In terms of reliability and stability, the towers are absolutely not inferior to similar scaffolding - thanks to the diagonals and ties, the structure turns out to be very rigid and durable.

Stabilizers and jacks
These two elements are used to provide stability and safety. Each of them is used in certain conditions:

stabilizers, or inclined corner supports, are required if the height of the tour reaches more than 7 meters;
jacks, or screw supports, serve to level the structure on uneven surfaces. They are always used for outdoor work. Indoors, where the floor is flat, their use is optional.
Regardless of the type of support, the towers are equipped with rollers. Most often they have a small diameter and a rotating assembly, which simplifies operation, makes it easy to move the finished tower in different directions and install it in a convenient place. Half of the wheels (and sometimes even all) are equipped with a foot brake, which, with a simple push, locks them, securely fixing them in one position. If the rollers break, they can be easily replaced. By clicking on the link https://www.fregat.com.ua/kolesa-dlya-stroitelnyh-lesov-i-peredvizhnyh-podmostey, you can find wheels of different load capacity and diameter in a large assortment.

Working platform width
The scaffold tower can have a narrow or wide deck. Which one to choose depends on the specifics of the task, the number of employees involved, and the materials used.

Narrow (up to 0.7 m) is used for interior work in a confined space or if one or two people are involved in the process, there are not a lot of tools, auxiliary equipment and other things that clutter up the place. The main thing is that the builders are comfortable and not cramped.

Wide platforms are designed for external work in an unlimited space, where a lot of personnel are involved, different equipment and tools are used. Such tours can have an area of ​​2x2 m.

The most versatile towers have a working surface width of 1.2 m.

Base material
The structure can be made of different materials:

Aluminum. Such towers are used both outdoors and in buildings. Due to the high corrosion resistance of aluminum alloys, they have a long service life.
Steel. Despite the fact that they cost a little cheaper than the previous ones, they are absolutely not inferior in quality. A special protective epoxy coating or painting prevents corrosion from eroding the steel. This ensures a long service life.
Both types of towers have a certain load limit. It does not depend on the material of manufacture, but on the design features.

Correct tower height
To find your ideal height, follow these simple guidelines:

If the work is outside, it should be higher than the object being repaired.
If the internal ones are below the ceiling.
A universal option is tower-tours with intermediate sections or telescopic with a cable mechanism. They allow you to adjust the height as needed. Dealing with how the structure is assembled is absolutely not difficult. Almost all of them are mounted in a similar intuitive way.

It is difficult to imagine small construction projects without towers. They are indispensable equipment that helps to solve any problem.